Facemate ES 330 LCD Panel Indication

Default Setting

Mixed Wave Function

1. Press "Select" to choose .
2. When the mark light is blinking, press "up and down" buttons to adjust the intensity of the wave.
3. If no change in 5 seconds, it will return to default setting automatically.
4. It can be used with High Energetic Light Setting and Skin Moisture Test. Do not use the function with Ultrasonic Setting and .

Ultrasonic Setting

1. Press "Select" to choose .
2. When the mark light is blinking, press "Select" button to select 1MHz or 3MHz vibration, then press "Up and Down" buttons to adjust the intensity of the ultrasonic
   wave ( 1~8 ).
3. No change in 5 seconds, it will return to default setting automatically.
4. You are recommended to use the 1~5 intensities for your face, and use the 6~8intensities for your body. In addition, do not use the function with Mixed Wave Function and , but it can be used with High Energetic Light Setting and Skin Moisture Test.

High Energetic Light Setting

1. Press "Select" to choose .
2. Press "Up and Down" buttons to select High Energetic Light Setting On or Off.
3. There is no restriction with this application.

Time Setting

1. Press "Select" to choose .
2. When the 15 mark light is blinking, press "Up and Down" buttons to set the time
   (5 minutes per interval setting). If you do not change anything in 5 seconds, it will return to default setting automatically.
3. Time default setting: 15 minutes (range 5-30 minutes).

Skin Moisture Test

1. Press "Select" to choose .
2. The quantity of water contained , "" : lacked ; "" : average or full; : from lacked to full. .  ISO 9001